Storing mini grease guns: Drying and ventilation are the key, keep away from moisture to prevent clogging

Hazards of humid environments
Mini grease guns are usually made of metal, plastic and other materials, which are prone to chemical reactions in humid environments, causing rust or corrosion. When metal parts rust, it not only affects the appearance, but more importantly, it will destroy its original smooth surface, increase the friction when butter or sauce passes through, and thus increase the risk of clogging. Plastic parts may also age in a humid environment, become fragile and fragile, and affect the stability and service life of the overall structure.

In addition, a humid environment may also promote the growth of mold and bacteria, which is a hygiene issue that cannot be ignored for food contact tools. Although mini grease guns are usually designed with a sealing structure inside to prevent external contamination, the sealing performance may decrease if they are in a humid environment for a long time, increasing the risk of food contamination.

The importance of drying and ventilation
In order to avoid the above problems, when storing mini grease guns, you should choose a dry and well-ventilated place. A dry environment can slow down the rusting of metal and the aging of plastic, and maintain the finish and durability of the tool. Good ventilation helps to reduce the humidity in the air, reduce the possibility of mold and bacteria, and keep the tool clean and hygienic.

Specifically, when storing a mini grease gun, you can place it in a kitchen cabinet and make sure the cabinet door is closed to reduce moisture intrusion. If the humidity in the kitchen is high, you can consider using a dehumidifier or dehumidifier to reduce the indoor humidity. At the same time, avoid exposing the mini grease gun directly to sunlight or high temperature to prevent the material from deforming or damaging.

Preparation before storage
Before storing the mini grease gun, you need to do some preparation. First, make sure that the inside of the grease gun has been cleaned and there is no residual butter or sauce. You can use warm water and mild detergent to clean it, then rinse it with clean water and wipe it dry with a clean cloth. Secondly, check whether the sealing performance of the grease gun is good. If there is any damage, the seal should be replaced in time. Finally, disassemble the various parts of the grease gun and store them separately to reduce deformation or damage caused by long-term squeezing.

Regular maintenance
Even if it is stored properly, the mini grease gun needs regular maintenance. You can check the status of the grease gun every once in a while (such as every month) to ensure that there are no signs of blockage or rust inside. If any problems are found, they should be dealt with promptly, such as using a slender tool to clear the blockage, or applying anti-rust oil to protect metal parts.